Optically Clear Edge Sealing Tape
Optically Clear Edge minimizes the adverse effects of rigorous use or prolonged or severe exposure conditions by providing water and contaminant-tight seal between a graphic film and substrate. Edge sealer is a pressure sensitive, optically clear tape with a clear polyester liner used to seal vehicle perforated window graphics and for sealing cut edges and seams on watercraft graphics, Car and Truck Wraps.
Prepare the Graphic for Edge Sealing
1. Do not apply edge sealer unless the temperature is above the minimum recommended temperature.
2. Remove any application tape and re-squeegee the edges before applying the edge sealer.
3. Make sure all edges to be sealed are clean, dry and free of contaminants.
Applying Edge Sealing Tape
Apply a 1/2 inch (13 mm) strip of overlaminate so each strip evenly straddles the perforated film and substrate.
Important Note! Never allow film or overlaminate to touch the rubber window molding.
Note: Carefully read and follow manufacturer’s precautions and directions for use when handling solvents.